Product Description
Product Description
Introducing the HMCG-I Series Harmonic Reducer
Get ready to revolutionize your high precision applications with the HMCG-I series harmonic reducer from HangZhou Yijiaang Automation Technology Co., Ltd! This incredible gearbox is designed to take your aerospace, robotics, semiconductors, power inspection, and automation equipment to new heights.
Experience the Power of Harmonic Gear Transmission
Discover the cutting-edge transmission mode invented by American inventor C.W.Musser in 1955. The HMCG-I series utilizes the elastic deformation of flexible working components to achieve movement and power transmission like never before. Say goodbye to traditional rigid components and embrace the flexibility that brings a whole new level of functionality to your applications.
Unleash the Deceleration Principle
With the HMCG-I series harmonic reducer, you can harness the power of the deceleration principle. Watch as the flexwheel, rigid wheel, and wave generator work together in perfect harmony to achieve seamless motion and power transmission. The innovative design ensures that the flexwheel constantly deforms, resulting in precise and efficient movement transmission.
Product Specifications
- Product Name: Industrial Robot Ultra-Thin Series Hmcg Harmonic Precision Reducer
- Applicable Industries: Machinery, Agricultural Machinery, Car, Robot
- Hardened Tooth Surface: Yes
- Installation Type: Horizontal Type
Don’t miss out on the opportunity to enhance your applications with the HMCG-I series harmonic reducer. Upgrade to the future of precision and efficiency today!
Product Parameters
Model | Reduction ratio | Rated torque at input 2000r/min |
Permissible CHINAMFG torque at start/stop | Permissible max.value of ave.load torque | instantaneous permissible max.torque | Permssibie max.input rotational speed | Permissible ave.input rotational speed | Backlash (arc sec) | Transmission accuracy(arc sec) |
Nm | Nm | Nm | Nm | r/min | r/min | ≤ | ≤ | ||
14 | 50 | 7 | 23 | 9 | 46 | 8000 | 3500 | 20 | 90 |
80 | 10 | 30 | 14 | 51 | 20 | 90 | |||
100 | 10 | 36 | 14 | 70 | 10 | 90 | |||
17 | 50 | 21 | 44 | 34 | 91 | 7000 | 3500 | 20 | 90 |
80 | 29 | 56 | 35 | 113 | 20 | 90 | |||
100 | 31 | 70 | 51 | 143 | 10 | 90 | |||
20 | 50 | 33 | 73 | 44 | 127 | 6000 | 3500 | 20 | 60 |
80 | 44 | 96 | 61 | 165 | 20 | 60 | |||
100 | 52 | 107 | 64 | 191 | 10 | 60 | |||
120 | 52 | 113 | 64 | 161 | 10 | 60 | |||
25 | 50 | 51 | 127 | 72 | 242 | 5500 | 3500 | 20 | 60 |
80 | 82 | 178 | 113 | 332 | 20 | 60 | |||
100 | 87 | 204 | 140 | 369 | 10 | 60 | |||
120 | 87 | 217 | 140 | 395 | 10 | 60 | |||
32 | 50 | 99 | 281 | 140 | 497 | 4500 | 3500 | 20 | 60 |
80 | 153 | 395 | 217 | 738 | 10 | 60 | |||
100 | 178 | 433 | 281 | 841 | 10 | 60 | |||
120 | 178 | 459 | 281 | 892 | 10 | 60 | |||
40 | 50 | 178 | 523 | 255 | 892 | 4000 | 3000 | 10 | 60 |
80 | 268 | 675 | 369 | 1270 | 10 | 60 | |||
100 | 345 | 738 | 484 | 1400 | 10 | 60 | |||
120 | 382 | 802 | 586 | 1530 | 10 | 60 |
Company Profile
Industrial Robot Ultra-Thin Series Hmcg Harmonic Precision Reducer
Introducing the Industrial Robot Ultra-Thin Series Hmcg Harmonic Precision Reducer
Upgrade your machinery with the cutting-edge technology of the Industrial Robot Ultra-Thin Series Hmcg Harmonic Precision Reducer from HangZhou Yijiaang Automation Technology Co., Ltd. This product is designed to elevate your transmission components, offering unmatched performance and reliability.
Key Features:
- Hardened tooth surface for durability and longevity
- Horizontal installation design for easy integration
- Exceptional speed reduction capabilities
- Advanced gearbox technology for smooth and precise operation
Applications:
Perfect for machinery, agricultural equipment, cars, and robots. Ideal for use in CNC machine tools, packaging machinery, printing machinery, automation equipment, joint robots, medical equipment, AGV, and more.
Why Choose Us:
At HangZhou Yijiaang Automation Technology Co., Ltd, we are dedicated to providing top-quality products and services. Our team of experts focuses on technological innovation and customer satisfaction, ensuring you receive the best experience possible.
Enhance Your Machinery Today:
Don’t miss the chance to boost your machinery with the Industrial Robot Ultra-Thin Series Hmcg Harmonic Precision Reducer. Join us in advancing efficiency and productivity. Contact us now!
Detailed Photos
FAQ
Industrial Robot Ultra-Thin Series Hmcg Harmonic Precision Reducer
Introducing the Industrial Robot Ultra-Thin Series Hmcg Harmonic Precision Reducer
Looking for a high-quality gearbox/speed reducer for your machinery, agricultural equipment, car, or robot? HangZhou Yijiaang Automation Technology Co., Ltd presents the Industrial Robot Ultra-Thin Series Hmcg Harmonic Precision Reducer.
Featuring a hardened tooth surface, this reducer is designed to withstand tough conditions with ease. Its horizontal installation allows for seamless integration into your current setup.
When selecting a gearbox/speed reducer, providing essential information is key to ensuring a perfect fit. You can supply the motor drawing with parameters, and our skilled engineers will recommend the most suitable gearbox model. Alternatively, you can specify:
- Type, model, and torque
- Ratio or output speed
- Working condition and connection method
- Input mode and input speed
By providing these details, you can be confident in receiving a gearbox/speed reducer that precisely meets your needs.
Don’t miss the chance to enhance your machinery’s performance with our Industrial Robot Ultra-Thin Series Hmcg Harmonic Precision Reducer. Contact us today and experience the difference!
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
Application: | Machinery, Agricultural Machinery, Car, Robot |
---|---|
Hardness: | Hardened Tooth Surface |
Installation: | Horizontal Type |
Layout: | Coaxial |
Gear Shape: | Cylindrical Gear |
Step: | Single-Step |
Samples: |
US$ 200/Piece
1 Piece(Min.Order) | |
---|
Customization: |
Available
| Customized Request |
---|
Lubrication Practices for Extending the Lifespan of Agricultural Gearboxes
Proper lubrication is essential for ensuring the longevity and optimal performance of agricultural gearboxes. Here are some essential lubrication practices that can help extend the lifespan of these gearboxes:
- Choose the Right Lubricant: Select a high-quality lubricant specifically designed for gearboxes and agricultural machinery. Consider factors such as viscosity, temperature range, and load-bearing capacity to ensure compatibility with the gearbox’s operating conditions.
- Regular Inspection: Perform regular visual inspections of the gearbox and lubricant to check for signs of contamination, wear, or inadequate lubrication. Address any issues promptly to prevent further damage.
- Cleanliness: Maintain a clean environment around the gearbox to minimize the risk of dirt, debris, and moisture entering the gearbox housing. Contaminants can compromise the lubricant’s effectiveness and accelerate wear.
- Lubricant Level: Monitor and maintain the proper lubricant level in the gearbox. Insufficient lubrication can lead to increased friction and heat, causing premature wear and potential damage to gears and bearings.
- Replace Lubricant: Follow the manufacturer’s recommendations for lubricant change intervals. Over time, lubricants can degrade, lose their properties, and become contaminated. Regularly replacing the lubricant helps ensure optimal performance.
- Use Lubrication Schedule: Create a lubrication schedule based on the gearbox’s usage and operating conditions. Stick to the recommended intervals for applying or changing lubricant to prevent under-lubrication or over-lubrication.
- Appropriate Lubrication Method: Follow the manufacturer’s guidelines for the correct lubrication method, whether it’s through oil bath, grease, or automatic lubrication systems. Proper application ensures even distribution of lubricant across gear surfaces.
- Temperature Considerations: Be aware of temperature variations in your operating environment. Extreme temperatures can affect lubricant viscosity and performance. Choose a lubricant that can handle the temperature range of your equipment.
- Expert Advice: Consult the gearbox manufacturer or a lubrication specialist to determine the best lubrication practices for your specific agricultural gearbox model and application.
By adhering to these lubrication practices, farmers can maximize the lifespan of their agricultural gearboxes, minimize downtime, and ensure efficient and reliable operation of their equipment.
Handling Varying Torque Demands with Agricultural Gearboxes
Agricultural gearboxes are designed to handle the varying torque demands associated with different tasks in farming operations. The torque requirements can vary based on factors such as the type of task, the soil conditions, the terrain, and the machinery’s speed. Agricultural gearboxes are equipped with features that allow them to adapt to these varying torque demands:
- Gear Ratio Selection: Agricultural gearboxes often come with multiple gear ratios, allowing operators to select the appropriate ratio for the task at hand. Lower gear ratios provide higher torque for tasks that require more force, such as plowing or tilling, while higher gear ratios offer higher speeds for tasks like mowing or transporting.
- Torque Multiplier: Some agricultural gearboxes are designed with torque multipliers that enhance the torque output from the engine to the wheels or implement. These multipliers are engaged when higher torque is needed, helping the machinery handle heavy loads or challenging terrain.
- Adjustable Speeds: Many agricultural gearboxes allow operators to adjust the speed of the machinery to match the torque requirements of the task. This flexibility is essential for tasks that involve both high-torque, low-speed operations and high-speed operations with lower torque needs.
- Power Take-Off (PTO) Options: Agricultural gearboxes often feature power take-off mechanisms that enable the transfer of power from the engine to attached implements. These mechanisms can be designed to provide varying torque outputs to suit different implements, such as rotary tillers, balers, or pumps.
The ability of agricultural gearboxes to handle varying torque demands is crucial for ensuring efficient and effective farming operations. By offering adjustable gear ratios, torque multipliers, and adaptable speeds, these gearboxes empower farmers to optimize their machinery’s performance based on the specific requirements of each task.
Power Transmission in Farming Equipment with Agricultural Gearboxes
Agricultural gearboxes play a vital role in facilitating power transmission within various types of farming equipment. These gearboxes are integral components that enable the transfer of rotational power from a tractor’s engine to different agricultural implements and machinery. Here’s how agricultural gearboxes contribute to power transmission:
- Speed Reduction: In many farming operations, the engine of a tractor or other power source operates at a higher speed than is suitable for the optimal functioning of agricultural implements. Agricultural gearboxes provide speed reduction by using a combination of gears with different numbers of teeth. This reduction in speed allows the machinery to operate at the required speed for efficient tasks like tilling, planting, or harvesting.
- Power Multiplication: Some agricultural tasks require a significant amount of torque to operate effectively. Gearboxes can multiply the input torque from the engine to generate higher torque at the output shaft. This is crucial for tasks such as plowing, where substantial force is needed to break up the soil.
- Directional Change: Agricultural gearboxes also allow for changes in the direction of power transmission. For instance, a tractor’s power take-off (PTO) shaft may need to transmit power at a right angle to the tractor’s engine. Gearboxes with bevel gears or other arrangements enable this change in direction, ensuring that power is properly directed to the implement.
- Power Distribution: In certain cases, power needs to be distributed to multiple components or implements. Agricultural gearboxes with multiple output shafts can distribute power to different tasks simultaneously, optimizing efficiency and productivity.
- Attachment Operation: Many agricultural implements, such as plows, seed drills, and rotary mowers, require consistent and controlled power to function effectively. Gearboxes provide the necessary power and control to these attachments, ensuring uniform operation and accurate results.
By facilitating speed reduction, power multiplication, directional changes, power distribution, and attachment operation, agricultural gearboxes contribute significantly to the overall efficiency and productivity of farming equipment. They allow farmers to adapt their machinery to various tasks, optimize power usage, and achieve better results in different agricultural operations.
editor by CX 2024-05-17